Thermal Image Electrical Surveys Leeds

Thermal Image Electrical Surveys Leeds

Thermal Image Electrical Surveys Leeds

Hi, welcome to MPS Electrical Ltd Thermal Image Electrical Surveys Leeds page.

Thermal imaging Find existing faults and predict potential future issues.
Electrical inspection Domestic, commercial & industrial electrical contractors in Leeds.
Insurance support Routine maintenance or to satisfy insurance companies.
Thermal Image Electrical Surveys Leeds
Thermographic imaging Surveys Leeds MPS Electrical Ltd 0113

Thermal Image Electrical Surveys Leeds-MPS-Electrical-Ltd 0113 3909670

Thermographic imaging Surveys Leeds MPS Electrical Ltd 0113

Hi, welcome to MPS Electrical Ltd Thermal Image Electrical Surveys Leeds page.

We are 18th edition City & Guild Electrical Approved. We are domestic, commercial & industrial electrical contractors in Leeds.

Electrical Inspection & Testing

We specialise in Electrical Inspection & Testing. We conduct Thermographic Imaging Electrical Surveys on any property for peace of mind.

This is for routine maintenance or to satisfy insurance companies. We make sure no electrical issues are obvious.

Thermal Image Electrical Surveys Leeds

We conduct electrical Thermal Image Electrical Surveys Leeds, Bradford, Wakefield, York & Harrogate.

We stretch further a field for our commercial customers and work nationwide if needed.

Thermal imaging examples

Electrical heat issues identified before failure

Thermal Imaging

Using thermal imaging, our electricians can accurately find existing faults with an electrical installation.

They can also predict potential future issues. This ability will save lives and stop the property from catching fire.

Thermal Imaging Leeds

Thermal Image Electrical Surveys Leeds detects electrical anomalies that are often invisible to the naked eye.

It identifies issues on electrical installations, including burning loose electrical connections inside mains consumer units.

This applies to both single-phase and three-phase systems.

Corrective action before failure

Thermal Image Electrical Surveys Leeds identifies these issues.

This allows corrective actions to be taken. These measures are taken before catastrophic costly system failures occur.

Electrical Thermal Imaging Reports

Electrical Thermal Imaging Reports or Thermal Image Electrical Surveys Leeds reports is a process.

It uses a special camera designed to look only for heat. This is done by capturing infra red (IR) energy waves.

Excess heat released by an electrical system can show potential problems.

Prevent expensive failure

If Electrical heat build up issues within electrical installations stay undetected, these problems can lead to failure.

They can also result in an electrical fire. This almost certainly means an expensive production loss or downtime.

In the most extreme case, it can lead to an electrical fire.

Routine maintenance

A regular inspection of thermal imaging as part of reactive routine maintenance can highlight potential problems long before any event.

As a result any required electrical replacements or repairs can be planned for in terms of both time and budgets.

Detection areas

What Thermal Image Electrical Surveys Leeds can detect

Electrical systems in Leeds

  • Loose connections
  • Overloads
  • Phase imbalances
  • Corrosion
  • High resistance in fuses and switch gear

Mechanical systems in Leeds

  • Motor overload
  • Worn Bearings
  • Boiler seal leakage
  • Insulation breakdown
  • Hydraulic, steam and hot water systems
  • Tank levels and insulation
  • Valves
  • Turbines

Buildings in Leeds

  • Continuity of insulation
  • Flat roof leakage
  • Heating, ventilation and air conditioning
  • Cold storage thermal gain
  • Seals

In short

In short, it is an invaluable resource for predictive maintenance.

Thermal Image Electrical Surveys Leeds has applications in many different areas which are listed below.

Electrical Inspection And Thermographic Testing Testing in Leeds

The Electricity at Work Regulations of 1989 requests a “duty of care” on landlords and employers.

They must keep electrical systems to prevent danger.

Why do I need to carry out an Thermal Image Electrical Surveys Leeds

Thermal imaging is a widely used method. It can find problems that the naked eye can’t.

Additionally, it is non-invasive or intrusive.

Thermal imaging can detect potential problems within the electrical distribution system without the need to isolate circuits.

Thermal imaging reports

Images can be taken of key components captured in a thermal image and a digital image.

Thermal imaging lets you carry out live testing whilst meeting your obligations under legislation.

Who should do the work?

This type of work must be carried out by a qualified electrician.

The electrician must be experienced in 18th edition standards and qualified to City & Guilds.

All of our Electricians are fully qualified electricians who have experience of test and inspection.

Survey findings

Thermal Image Electrical Surveys Leeds examples

3 Phase isolator burning out in a factory in Leeds

3 Phase isolator burning out in a factory in Leeds

Note L1 L2 & L3 connections glowing red

Loose connections on 3 pole 3 phase contactors

Lose connections on 3 pole 3 phase contactors

Located in this mains electrical enclosure

Loose L1 phase connection

Again, a lose L1 phase connection

On a 3 phase Isolator installed in a industrial packaging firm in Leeds

Mains distribution board lose terminal connections identified in Leeds

Mains distribution board lose terminal connections identified in Leeds.

What is Thermal Image Electrical Surveys Leeds all about?

Thermographic inspection of electrical infrastructure

Thermographic inspection of electrical infrastructure using infrared cameras in Leeds that show temperatures.

This is known as Thermal Image Electrical Surveys Leeds or radiometric thermal imaging.

It is applied to open switch gear, electrical panels, distribution boards, switches, tap offs, bus bars, and other electrical items.

Load Corrected temperature

Load Corrected temperature which estimates temperature based on top load

Fault severity

Fault severity taken from differential between Load Corr and British Standard cable Reference temp set at 75C (65-85C)

Highest amps

Highest amps that can be safely run without exceeding the BS Reference temperature set at 75C (65-85C)

Incentive to inspect Leeds Properties?

A trained professional can produce a detailed report.

This will help show that reasonable steps have been taken.

These steps confirm your electrical infrastructure is of reasonable integrity.

Customer Reviews

What Customers Say

"Marc and his team helped me after another electrician completely messed up a job. Extremely professional, transparent on cost, and fixed everything quickly."

Michael Nicoll

"Second job they've done for us — on time, professional and reasonably priced. Will definitely use again."

Andrejs Gulevskis

"Quick, efficient and professional service. Great communication. Highly recommend."

Sara Brook

"Marc even spent 30 minutes on the phone helping before visiting. Really rare level of service."

Elizabeth MacFadyen

Need Thermal Image Electrical Surveys Leeds?

Call MPS Electrical Ltd for thermal imaging, electrical inspection and thermographic testing in Leeds.

Phone 0113 3909670
Mobile 0770 3020260
Location LS25 Leeds